Characteristic
– Class 5 according to PN-EN 303-5:2012
– Ecodesign
– High efficiency
– Automatic work
– Fast and easy operation
– Economical fuel combustion
– Smokeless and ecological combustion
– Ability to control the boiler’s operation via Internet (option)
– Possibility to install the fuel tank on the left or right side of flues
POSEJDON
The Posejdon model boilers are intended for water open system central heating installations with both gravitational and forced water circulation. The installation must be secured according to currently valid and detailed national provisions. Steel Posejdon model boilers with automatic fuel supply system are intended for work in central heating installations and domestic hot water preparation installations in housing development buildings, i.e. single family houses, commercial pavilions, garages, and utility buildings. Boilers constitute a steel structure welded from certified 6 mm thick boiler sheets that ensure a long-term use. The controller handles CH and DHW pumps, as well as auxiliary pump and valve actuator. There is a possibility to connect room regulator and SafeIT (control via Internet) module.
L.p | Specification | J.m | Information | |||
1. | Boiler type | Posejdon 10kW | Posejdon 14kW | Posejdon 18kW | ||
2. | Nominal thermal power | kW | 10 | 14 | 18 | |
3. | Range of power for coal | kW | ||||
4. | Size of heated surface | m² | up to 100 | up to 140 | up to 180 | |
5. | Capacity of the storage chamber | l | 136 | |||
6. | Combustion upon nominal power | h | 77,7/272 | 57/217 | 43,5/181 | |
7. | Boiler class due to PN-EN 303-5 | 5 | ||||
8. | Efficiency | % | 89,16 | 88,89 | 88,96 | |
9. | Maximum working temperature (water supply) | °C | 85 | |||
10, | Temp. of water in the supply min./max | °C | 55/80 | |||
11. | Minimum working temperature (return) | °C | 50 | |||
12. | Minimum working temperature | °C | 10 | |||
13. | Exhaust mass flow nom./min | °C | 113/66 | 108/63 | 132/64 | |
14. | Exhaust mass flow | g/s | 6,7/2,7 | 10,3/3,3 | 11,8/4,4 | |
15. | Required capacity of the heat accumulator Qmin>0,3QN | L | 200 | 280 | 360 | |
16. | Emission of noise | dB | <60 | |||
17. | Maximum permissible working pressure | bar | 1,5 | |||
18. | Flow resistance | at ΔT=10K | mbar | b.d | ||
at ΔT=20K | mbar | b.d | ||||
19. | Fuel | Black coal sort of pea, granulation 5-25mm | ||||
20. | Mass of the boiler (±5%) | kg | 240 | 270 | 308 | |
21. | Required exhaust flow | mbar | 0,24 | 0,25 | 0,26 | |
22. | Power supply | W | 122 | 122 | 162 | |
23. | Water capacity of the boiler | L | 43 | 48 | 64 | |
24. | Exchanger surface area | m² | 1,2 | 1,6 | 1,9 | |
25. | The cross-section of the flue | mm | Ø127 | Ø158 | Ø158 | |
26. | Water supply connector/return | cal | 1 | |||
27. |
Dimension
|
A | mm | 378 | 378 | 460 |
B | mm | 625 | 630 | 630 | ||
C | mm | 1025 | 1030 | 1110 | ||
D | mm | 1088 | 1100 | 1100 | ||
E | mm | 785 | 863 | 863 | ||
F | mm | 510 | 588 | 588 | ||
G | mm | 817 | ||||
H | mm | 121 |